EZspin-SD

Spin Coating is an easy to use, safe and inexpensive method. This method is extremely desirable for many applications where high quality of layers are required. Despite of the process simplicity, several experimental and theoretical investigations appeared in the literature explaining the dependence of the spin coating process on the electrical, optical and morphological characteristics of the films.In such a way that the control of the fluid flow and the fluid evaporation are essential to meet uniform thin films.Since both contribute to the overall rate of the thinning during spinning of the fluid on the substrate.For example, if there are no evaporation of the solvent, the film thickness at long time varies with spin speed and time. Just like predecessor namely SCU2007 & SCU2008C, the newly launched spinNXG and the EZspin series of spin coaters from Apex Instruments makes the spin coating process an hassle free experience for the user.

Spin Coating Systems

EZspin-SD

Precision is of vital importance in this process and the spin coaters used for this purpose must be accurate. Apex brings to its customers an entry-level spin coating system, model EZspin-SD.

EZspin-SD Enquiry Form

Name

First Name

Last Name

Organisation

Address

Address 1

Address 2

City

State/Province

Zip/Postal Code

Country

Email Address

Phone

Message

Spin Coating System - EZspin-SD

The high speed and duration range allow the user to achieve the desired thickness or thinness of the film. Acceleration too, is one of the major determinants of the process. As spin coating uses centrifugal force, it is of crucial importance to accurately set the parameters for spin coating.

At Apex, we understand that spin coating is a very delicate process. The slightest change in the prescribed parameters can result in drastic changes in the film produced. As a consequence, user control becomes a very important feature of a spin coater.

The following features of EZspin-SD makes it a worthy investment:

High Speed Range : 500 to 6000 RPM
High Duration Range : 1 - 1200 seconds
Acceleration Period : 2 - 3 seconds
Working Chamber : Teflon Coated 6" Diameter

Accurate Film Coating

EZspin-SD has a Teflon coated Working chamber of 6 inches diameter and also includes a transparent photo-resist safety lid over the Working chamber making spin coating a hassle free experience.
This spin coater comes with an integrated calibration option which helps the user to achieve uniform coating on different substrate sizes.

Sophisticated Mechanism & Electronics

EZspin-SD is micro-controller controlled and comes equipped with a brushless DC motor, which is highly reliable as it requires very low maintenance compared to the normal DC motor with brush. Also, the presence of non-volatile program memory ensures that the recorded parameters are not lost in any case of power failure.

Easy User Interface for Ease of Research

Spin coater EZspin-SD comes equipped with a user-friendly firmware interface. The Input and Controlling is entirely done through push-dial encoder, thereby allowing the user to have complete control over the process.
Furthermore, the real time display of rotations per minute, timing and program status is displayed on a four-line LCD console throughout.