Spin Coating System - spinNXG-P1AC

Our model SpinNXG-P1 AC is not only absolutely precise, but is also powerfully designed to ensure that spin coating remains a flawless experiment.

Accurate Controlling

At Apex, we believe in delivering value. Thus, our spin coating systems include a host of features to make it very user friendly. These include:

  • Input and Controlling through PC software in PC GUI Mode and through keypad in Standalone mode

  • User friendly software and firmware interface

  • Real time display of rotations per minute, timing and program status in PC Software and on four-line LCD Console 

  • Real time display of Speed v/s Time graph in PC software

  • Non-volatile program memory

The salient features of SpinNXG-P1 AC

  • Very High Speed Range: 100 - 10000 RPM

  • Very High Acceleration: 40 - 5000 RPM

  • Longer Duration Range: 1 - 9999 seconds / step

  • Less than 1 percent error across the entire speed range

Chief features of SpinNXG-P1 AC

  • 15 pre-set programs in stand-alone mode which can be edited as per requirement

  • 20 steps allowed in program writing in the stand-alone mode

  • Unlimited steps allowed in PC Mode allows spin protocol setting without any limits

  • Unlimited programs in the PC Mode

 

Product Specifications - SpinNXG-P1 AC

  • Micro-controller based

  • Controlling option: PC GUI mode and Standalone mode (Keypad and LCD)

  • Speed Range: 100-10,000 R.P.M.[based on a Glass Substrate of Dimension 1.5" (L) X 1" (W) & Thickness 0.05"]

  • <±1% Error across the Full Speed Range

  • Acceleration: 40-5,000 R.P.M./sec[based on a Glass Substrate of Dimension 1.5" (L) X 1" (W) & Thickness 0.05"]

  • Duration: 1-9,999 sec/step

  • Unlimited Programs in PC GUI Mode & 15 Preset Editable Programs in Standalone Mode

  • Unlimited Steps/Program in PC GUI Mode & 20 Steps (Maximum)/Program in Standalone Mode

  • Real-time Display of R.P.M., Timing & Program Status in PC Software in PC GUI Mode & on 4 Line LCD Console in Standalone Mode

  • Real-time Display of R.P.M. vs. Time Graph in PC Software in PC GUI Mode

  • Non-volatile Program Memory

  • Input & Controlling through PC Software in PC GUI Mode & through Key-pad in Standalone Mode

  • PTFE coated Working Chamber of 8" Diameter

  • User-friendly PC Software & Firmware Interface

  • Integrated Power On/Off Switch with Indicator

  • Integrated Vacuum release Switch with On/Off Indicator : Yes, Both modes

  • Calibration Option : Yes, Both modes

  • Warm Up Option : Yes, Both modes

  • Spill-drainage Facility

  • Experimental Sample Details Saving Provision (in PC GUI mode)

  • N2 & other Inert Gas Purging Port

  • Transparent Photo-resist Safety Lid over the Working Chamber

  • In-situ Sample Dispensing Port on the Transparent Photo-resist Safety Lid

  • Power: 230V AC 50H

  • Wattage: 120 W (Maximum)

 

Learn more about the spinNXG-P1 AC in the Product Brochure

 

How it works Learn more about the Spin Coating Technology under the Technology Info tab